Filter
Top Products
8
How To Set The Clock
Set the hands to the correct time with the Time Set button. Push the Time Set button in
and release to move the hands in small increments or hold the button in to continuously
advance the hands. Be sure the front panel alarm button is in the OFF position when
adjusting the time.
How To Set The Alarm
1. Rotate the alarm thumbwheel counter-clockwise and set the alarm hand to the
approximate time you wish to wake to. DO NOT TURN THE ALARM BEZEL
CLOCKWISE OR YOU MAY DAMAGE THE MECHANISM.
2. Press the Alarm button ON and the green alarm LED will light. The alarm tone activate
when the clock time roughly coincides with the setting of the alarm hand.
3. To turn the Alarm OFF, press the Alarm button again and the Alarm LED will extinguish.
The Dual Alarm Speaker can be set to wake to the alarm tone only.
Important Note: Due to the nature of the alarm thumbwheel’s analog mechanism,
which was designed for simplicity, there can be up to a five-minute deviation from
when the alarm activates. For example, if the alarm is set for 10:00, it is possible it
could activate at 9:55 or 10:05. We recommend you set the alarm early the first
time you use it to accommodate for this. As you use your Dual Alarm Speaker you
will get a better idea of where you need to set the alarm in order to wake-up
at the desired time.