Tivoli Audio Dual Alarm Speaker Clock Radio User Manual


 
6
Guide To Features (Front Panel)
1. ALARM: Once you have set the wake-up time using the Alarm Thumbwheel, push
this button in to activate the alarm and the corresponding green LED will light. The
LED will remain lit until the Alarm button is turned off. Push the Alarm button out to
deactivate the alarm and the LED will extinguish. This Alarm button controls the
Dual Alarm Speaker only and has no affect on the Model Three clock radio’s alarm,
and vise-versa. See “How to set the alarm” for more information.
2. ALARM THUMBWHEEL: Rotate the aluminum thumbwheel counterclockwise
until the Alarm hand points to the designated time you wish to wake to. Do NOT
turn the Thumbwheel clockwise or you may damage the mechanism. See
“How to set the Alarm” for more information.
3. SNOOZE (Top of Cabinet): When the Alarm sounds, press, hold, and then release
the Snooze button to silence the Alarm for approximately 5 minutes. After 5 minutes,
the alarm will automatically resume. This Snooze button controls the Dual Alarm
Speaker only and has no affect on the Model Three clock radio’s alarm or radio.
Likewise, the Model Three’s Snooze button will not affect the Dual Alarm Speaker’s
alarm tone. The snooze time is not adjustable.
4. CLOCK: This quartz analog clock features a fine mechanical quartz movement
for superb accuracy. The clock operates off of a single “AA” battery so power
failures will not affect the clock’s accuracy. Check the battery annually so the
clock remains accurate. The clock’s illumination cannot be turned off or adjusted.
It is normal for the light to take take several seconds to extinguish if the power
supply is disconnected.