Filter
Top Products
8
Listening to Radio, Nature Sounds or AUX device
Note: Extend the FM wire antenna fully for best FM reception. Rotate the unit as needed for best AM reception.
1. Press the Alarm Reset/Power Button to turn on the unit.
2. To listen to the radio, set the Function Switch on the right side of the unit to the desired AM or FM band.
The current radio frequency will appear in the lower part of the display.
3. Turn the Tuning Control dial to select a station.
4. To listen to Nature Sounds, set the Function Switch to Sounds and press the << or >> Button to select
one of the four different sounds: forest, bells, heartbeat and ocean
5. To listen to an AUX audio device such as a MP3 player, set the Function Switch to AUX . Attach an audio
patch cord from your audio device‘s line out or headphone jack to the MP3-in Jack on the T436 and play
your MP3, CD or other audio device. You may need to adjust your audio device’s volume to get the best
result.
6. Turn the Volume Dial to adjust volume. Remember to turn off your AUX device when you are done
listening.
7. To stop listening press the Alarm Reset/Power On/Off Button to turn off the unit.
Sleep Operation
Sleep mode lets you sleep to the radio or to nature sounds until the unit shuts off after the selected time.
1. Press the Sleep Button to enter sleep mode. The Sleep Icon will appear on the display to indicate sleep
mode is activated.
2. You can adjust the sleep timer from 90, 60, 30 or 15 minutes by pressing the button again as needed. The
unit will automatically turn off after the selected time.
3. When the display changes back to show either radio frequency or nature sound, press the Sleep Button
once to show the sleep time remaining. Press again to change the sleep time to the next lowest setting.
4. To stop listening at any time, press the Alarm Reset/Power Button to turn the unit off.