Filter
Top Products
4
Reviewing The Wake Up Times
To review the current wake up time settings, press the ALM 1 or ALM 2 button once. The display will change from current
time to wake-up time for 5 seconds and the selected ALM 1 or ALM 2 indicator will flash. After 5 seconds the display
changes back to current time.
Activating / Deactivating The Alarms
Whenever you adjust the wake up time setting for ALM 1 or ALM 2 the alarms are automatically activated and the ALM 1 or
ALM 2 indicators appear in the display.
• To deactivate the alarms so they do not turn on, press the ALM 1 or ALM 2 button once and when the wake up time and
the flashing alarm indicator are appearing on the display, press the ALM 1 or ALM 2 button once more within 5 seconds.
The display immediately returns to current time and the clock will ‘beep’ twice. The ALM 1 or ALM 2 indicator disappears,
indicating that the alarms are deactivated.
• To reactivate the alarms, press the ALM 1 or ALM 2 button once and when the wake up time and the flashing alarm
indicator are appearing on the display, press the ALM 1 or ALM 2 button once more within 5 seconds. The display
immediately returns to current time and the clock will ‘beep’ twice. The ALM 1 or ALM 2 indicator reappears, indicating
that the alarms are activated again.
Snooze/Repeat Alarm
When the alarm turns on in the morning you may press the SNOOZE button to stop the alarm temporarily. The alarm will shut
off for 9 minutes and then turn on again. When the snooze function is active the alarm indicator for that alarm will flash. The
snooze operation may be repeated several times within the one-hour alarm duration, but after one hour the alarm resets for
the following day.
Adjusting The Snooze Time
The default snooze time setting is 9 minutes but you may adjust the snooze time between 1 minute and 29 minutes as
desired. To adjust the snooze time:
• Press and hold the SNOOZE button for two seconds. The clock will ‘beep’ once and the snooze time display begins
flashing.
• While the display is flashing press the “ – “ or “ + “ buttons to adjust the snooze time display down or up to the desired
setting.
• When the display is showing the desired snooze time, press the SNOOZE button once more. The clock will ‘beep’ twice
and the display returns to current time. The new snooze time setting becomes the new default and remains in the memory
until you change it again.
Sure Alarm
This Timex alarm clock includes a Sure-Alarm feature that will operate the buzzer alarms even during a power failure. If your
AC power is interrupted or if the AC adapter is accidentally disconnected, the display will turn ‘off’ but the alarms will still turn
‘on’ at the normal times.
Note: The Snooze function does not operate when the alarms are turned ‘on’ by the Sure-Alarm back up battery.
OPERATING INSTRUCTIONS