Filter
Top Products
EN
EN
7
Before You Begin
Inserting a SD card /
MultiMediaCard (Optional)
The player has built-in flash memory. To
extend the playtime, you can use the
optional Memory Card slot.
1. Insert a Memory Card into the card slot
on the top of the player when it is off
as illustrated in the diagram below.
2. To remove the card, pull the Memory
Card out when the unit is off.
Connecting the Lyra Player
to your Computer
1. Lift the rubber cover that is covering
the USB socket on the back of the
player.
2. Insert the smaller end of the USB cable
into the socket on the unit tightly.
3. Insert the larger end of the USB cable
to the USB socket on the back of the
computer.
Before You Begin
Important Battery
Information
• When storing the unit , be sure to
remove the batteries because they
may leak and damage the unit.
• Batteries may leak electrolyte if
inserted incorrectly, if disposed of in
fire, or if an attempt is made to charge
a battery not intended to be
recharged.
• Never mix new batteries with old ones.
Do not mix battery types.
• Discard leaky batteries immediately.
Leaking batteries may cause skin burns
or other personal injury.
• Do not charge batteries which are not
intended to be recharged.
• Dispose of batteries, according to
federal, state and local regulations.
Insert battery into the
player
1. To insert battery, push the
battery door away from the unit and
lift the battery door out.
2. Insert a “AAA”(UM4) battery with
polarities corresponding to the
indications in the compartment.
(Refer to “Before You Begin” for
important battery information.)
3. Close the door to the battery
compartment.
Note
Refer to the power level indicator on
display for battery level.
Replace with new battery when the
indicator is empty. Refer to “Display
Overview” on page 11.
Note
Do not remove the Memory Card
during playback or when the power is
on. This may stop the unit from
playing immediately or damage the
memory on the memory card or the
player.
6
Top View
PDP2548_56 EN budphones 12/6/04 9:34 AM Page 14