Filter
Top Products
EN
EN
USB display does not appear when
connected to computer.
• Check connection between your unit
and the computer. ( Refer to the “USB
Driver Installation; MusicMatch
Jukebox
TM
Software” instruction
manual)
• Check if the USB drivers are properly
installed ( Refer to the “USB Driver
Installation; MusicMatch Jukebox
TM
Software” instruction manual)
The player does not respond to key
operations?
• To reset the unit, turn the player off
by removing the batteries. Reinsert
the batteries properly and turn the
player on again to resume normal
operations.
Note
Under some rare circumstances,
your unit might report less memory
than is available for storing music
files. If this happens, format the
device to recover all the memory.
Warning:
Formatting the device will erase all
stored contents. Backup all the
valuable files before doing so.
!
More Information
19
More Information
Troubleshooting Tips
The player does not turn on when
PLAY button pressed.
• Battery may be inserted incorrectly.
• Battery may be empty.
Skipping tracks or bad sound
quality?
• Repeat, random or program function
may be activated.
• There may be strong magnetic fields
(e.g. too close to TV) near the unit.
• Low Battery level. Replace with new
one.
Cannot perform playback?
• LOCK function may be activated.
• There may be no mp3 tracks in the
card or internal memory.
• Memory Card may be damaged.
Cannot playback tracks on the
player.
•Make sure audio tracks are encoded
in the mp3 or Windows Media
formats at supported bitrates.
Bitrates support by the player:
mp3 – 32 to 320 kbps
wma – 48 to 160 kbps
•WMA files may be DRM protected
and you don’t have the proper rights
(license) to play the files.
Check the website and/or application
help system of the music download
service provider from where the content
was purchased from for license
acquisition details.
For more information on how license
acquisition works, go to
www
.microsoft.com/windowsmedia/drm.
18
Note
This unit may temporarily cease to
function if subjected to
electrostatic disturbance. To
resume normal operation, it may be
necessary to cycle the power off and
back on or to remove and reinstall
the batteries.
PDP2548_56 EN budphones 12/6/04 9:34 AM Page 26