Filter
Top Products
7
GETTING STARTED
STANDBY CONTROL
To turn the docking station on:
Press the •
button.
The unit will switch on and the buttons on the top panel will
light.
Auto Standby:
The unit will also set to standby automatically, approximately
two minutes after music has finished playing from a docked
iPhone/iPod or a source connected to the Audio Input jack.
Press the •
button.
POWER CONTROL
CONNECTING POWER
Before connecting the power, check that the mains voltage
on the rating plate of the AC adaptor is the same as the
voltage in your area.
Plug the DC cord from the AC adaptor into the DC jack on •
the back of the unit.
Plug the AC adaptor into the wall socket and switch the •
mains power on.
The unit is now ready for use.
NOTE:- The AC adaptor may become warm during operation
- this is normal.
DOCKING AN iPhone/iPod PLAYING FROM AN iPhone/iPod
DOCKING YOUR iPhone/iPod
To dock your iPhone/iPod:
Set the unit to Standby.
Check that the correct iPhone/iPod adaptor is fitted to the
docking bay (see previous page).
•
•
Locate the iPhone/iPod on the Docking Connector and
press it gently home.
•
The iPhone/iPod is now ready to play.
To remove your iPhone/iPod from the dock:
Set the unit to Standby.•
Grip the iPhone/iPod at the sides.•
Lift the iPhone/iPod gently from the dock.•
Playing from a docked iPhone/iPod:
Set the iPhone/iPod to play.•
You can also operate your iPhone/iPod functions from the
control panel or the remote control.
iPhone/iPod playback functions:
Press the button to toggle between Play and Pause
mode at any time.
Press the • or button on the remote control to select
the next or previous track on your iPhone/iPod.
Press the •
button to scroll through the repeat modes
available on the iPhone/iPod.
The display on the iPhone/iPod will show the repeat mode set.
The display on the iPhone/iPod will show if shue mode is set.
Press the •
iPhone/iPod menu functions:
When an iPhone/iPod is docked and playing you can navigate the
menus from the keys on the control panel or remote control.
To move up through the iPhone/iPod menu, press . • Menu.
To scroll up and down options displayed on the iPhone/iPod
menu, press the or button.
•
To select menu items, press the • Enter button on the
remote control.
CHARGING AN iPhone/iPod
When an iPhone/iPod is docked, the iPhone/iPod will begin to
charge automatically.
NOTE:- The iPhone/iPod will charge at all times that the unit is
connected to mains power.