9
VIDEO CONNECTION
Your docking station includes a video output jack to feed video
signals to a TV from an iPhone/iPod which has video capability.
NOTE:- The TV must have a composite video (CVBS) video
input.
To connect the docking station to a TV:
Connect the video cable (supplied, with yellow plugs) to •
the Video Out jack on the back panel.
Connect the other end of the cable to a Composite video •
(CVBS) input of the TV. A suitable input will often be
video input jack will be coloured yellow.
VIDEO PLAYBACK
Switching on the iPod video output:
Before viewing photo or video programs on your TV you
will need to switch on the iPhone/iPod video output. The
iPhone/iPod video output selector is generally found as follows -
Navigate to the ‘Videos’ or ‘Photos’ menu of the iPhone/iPod.•
Select ‘Settings’.•
Select ‘TV out’.•
Set ‘TV out’ to On.•
The video signal from the iPhone/iPod dock connector will now
be enabled.
Selecting the correct input on your TV:
Set the TV input selector to the AV input that you used •
when connecting the Video cable.
Playing the video:
Using the remote control, navigate to select the video •
you want to watch on the iPhone/iPod display and set it
to play.
The picture will play on the TV and the sound will play from
your docking station.
Typical video connection to a TV