Filter
Top Products
6
iPhone/iPod ADAPTORS SELECTING AN ADAPTOR
has a docking connector. Early iPod models do not have one
and cannot be docked to your unit. The docking connector is
located on the base of the iPod as shown below.
LIST OF SUPPLIED ADAPTORS
(15)
(16)
(17)
iPhone 3G.
iPod touch(2nd generation).
iPod nano(4nd generation).
Other iPhone/iPod models with dock connectors
Your iPhone/iPod may have been supplied, packed with a
standard dock adaptor. If so, this can be used as the docking
bay on your unit is compatible with adaptors supplied by Apple.
If you don’t have a dock adaptor
If your iPhone/iPod was not supplied with a standard dock
adaptor, you can buy one from Apple on-line. To determine
the exact model of your iPhone/iPod, refer to this web-link -
http://support.apple.com/kb/Ht1353. You can then browse
the iPhone/iPod accessories page on the Apple website to find
an adaptor for your iPhone/iPod model that can be purchased
on-line.
Once you have located the correct adaptor for your iPhone/iPod,
press it gently into the iPhonr/iPod Docking Bay before
attempting to dock your iPhone/iPod.
FINDING THE CORRECT iPhone/iPod ADAPTOR
Your iPhone/iPod docking system is supplied with a selection
of docking adaptors that are compatible with several models
in the iPhone/iPod range. Refer to the table of iPhone/iPod
models in the next column which lists the adapeor numbers
(marked underneath the adaptor), compatibility and instructions
for obtaining an adaptor for unlisted models.
NOTE: Do not dock an iPhone/iPod without fitting the correct
adapotor, you may damage the iPhone/iPod and your unit.
CONNECTING OTHER iPod
MODELS (INC SHUFFLE)
Docking Connector
iPhone/iPod adaptor
Docking bay
Before docking your iPhone/iPod, you must first fit the correct
iPhone/iPod adaptor to the docking bay. Each iPone/iPod
adaptor matches the shape of a particular iPhone/iPod and
is necessary to ensure that your iPhone/iPod is securely heid
when docked.
Headphone socket
To the Audio
Input jack
If you own an iPod Shuffle, a model without dock connector
or prefer to connect your iPhone/iPod by cable, you can
connect thesound output to the Audio Input jack on the rear
panel.
Using the 3.5mm stereo jack to jack cable (supplied, •
with grey plugs), connect one end of the cable to the
headphone socket of the iPhone/iPod, and the other
end to the Audio Input jack on the back panel.
To listen to your iPhone/iPod, follow the instructions
under ‘External Sources’ on page 8 for playing equipment
connected to the Audio Input jack.
•
NOTE:- The volume control of the iPhone/iPod must be turned
up when playing through the Audio Input jack.
NOTE:- An iPhone/iPod connected to the Audio Input jack
cannot be operated from the remote control.