Filter
Top Products
17
AFTER USING YOUR SYSTEM
Set to Standby.•
Switch the unit o at the mains and unplug it if you are •
leaving it unattended for a long period (holidays etc).
CARE AND CLEANING
All care and cleaning operations should be carried out with
the unit unplugged from the mains power.
Occasionally wipe the cabinet with a lint free duster. Never
clean the unit with liquids or solvents.
Loudspeaker grilles can be cleaned carefully with a soft
brush.
SPECIFICATIONS
Supply Voltage : ...................230 V~, 50Hz
Power Consumption .............25 W
Net Weight: ..........................4.36 kg
Class II construction double insulated.
This product must not be connected to earth.
CARE AND MAINTENANCE
WARRANTY
SPECIFICATIONS
Your Tesco appliance is covered by a warranty for 12 months
from the date of purchase. If a fault develops during this
period, please contact the TESCO electrical help line on 0845
456 6767. Please have your original purchase receipt with
you when you call. This warranty in no way aects your con-
sumer rights.
UK: Waste electrical products /batteries should
not be disposed of with household waste.
Separate disposal facilities exist, for your near-
est facilities. See www.recycle-more.co.uk or
in-store for details.
ROI: Produced after 13th August 2005. Waste
electrical products/batteries should not be dis-
posed of with household waste. Please recycle
where facilities exist. Check with your Local Au-
thority or retailer for recycling advice.
SYSTEM RESET
HEADPHONES
There is a headphone output socket on the front panel of the
unit. If headphones are connected to this socket for private
listening, the speakers will cut out automatically.
DAB is a terrestrial system and frequencies in dierent areas
vary. If you move the radio to another part of the country
performing a Full Scan may not be enough to re program the
radio you may need to reset the radio.
To restore the factory settings:
Set the system to DAB mode.•
Press and • hold the MEMORY/CLOCK button on the front
panel until the display ashes ‘Factory Reset’.
Press the • /SCAN button to conrm factory reset.
The unit will now scan for DAB broadcast stations in your
area.
After reset the settings are returned to the factory defaults
and all the presets are erased.