Filter
Top Products
13
PROGRAM PLAY FROM A CD OR MP3/WMA DISC
CD & MP3/WMA DISC PROGRAMMING
When playing a CD or MP3/WMA compilation disc, you can
store a random sequence of up to 64 tracks to play in your
preferred order.
STORING A CD PROGRAM
To store a CD program:
Load the disc you want to play, wait for the disc to read.•
Press the • MEMORY/CLOCK button on the front panel
or the CLOCK ADJ./PROGRAM button on the remote
control.
The Program Entry display will appear, prompting for the rst
track number to program (P-01).
Playing the program
When you have nished entering all tracks in your •
program, press the /SCAN button to start the
program playing.
Navigating the programmed tracks:
When the program is playing, the play and pause buttons
work as normal and you can skip between tracks in the
program by pressing the or buttons.
STORING A MP3/WMA PROGRAM
Some MP3/WMA compliation discs will be arranged with all
tracks in the ‘root’ folder of the disc, others will be arranged
within a set of folders. The same sequence is used for both
types of disc.
To store a MP3/WMA program:
Load the disc you want to play, and wait for the disc to •
read.
Press the • MEMORY/CLOCK button on the front panel
or the CLOCK ADJ./PROGRAM button on the remote
control.
The Program Entry display will appear, prompting for the rst
folder and track number to program (P-01).
Press the • or button to select the folder number
for the rst track you want to program.
NOTE: If all tracks are arranged in the ‘root’ directory of the
disc, only ‘Folder 1’ (F 01) will be selectable at this stage.
Press the • MEMORY/CLOCK button on the front panel
or the CLOCK ADJ./PROGRAM button on the remote
control to select this folder.
Press the • or button to select the track number
within this folder for the rst track you want to
program.
Press the • MEMORY/CLOCK button on the front panel
or the CLOCK ADJ./PROGRAM button on the remote
control to store this track into the program memory.
The track will be stored and the program counter will increase
to P-02.
Repeat the previous four steps to store the next and •
subsequent tracks in your program sequence.
Playing the program
When you have nished entering all tracks in your •
program, press the /SCAN button to start the
program playing.
Navigating the programmed tracks:
When the program is playing, the play and pause buttons
work as normal and you can skip between tracks in the
program by pressing the or buttons.
Program
position
Folder
number
Track
number
Program
position
Track
number
Press the • or button to select the track number
for the rst track you want to program.
Press the • MEMORY/CLOCK button on the front panel
or the CLOCK ADJ./PROGRAM button on the remote
control to store this track into the program memory.
The track will be stored and the program counter will increase
to P-02.
Repeat the above two steps to store the next and •
subsequent tracks in your program sequence.