Filter
Top Products
9
iPhone/iPod ADAPTORS FINDING AN ADAPTOR
Before docking your iPhone/iPod you must rst check if it
has a docking connector. Early iPod models do not have one
and cannot be docked to your unit. The docking connector is
located on the base of the iPhone/iPod as shown below.
If you don’t have a dock adaptor
If your iPhone/iPod was not supplied with a standard dock
adaptor, or if you have lost the adaptor, you can buy one from
Apple on-line. To determine the exact model of your iPhone/
iPod, refer to this web-link - http://support.apple.com/kb/
HT1353. You can then browse the iPhone/iPod accessories
page on the Apple website to nd an adaptor for your
iPhone/iPod model that can be purchased on-line.
If you own an iPod Shue, a model without dock connector or
prefer to connect your iPhone/iPod by cable, you can connect
the sound output to the Aux In jack on the rear panel.
FITTING THE iPhone/iPod ADAPTOR
When your iPhone/iPod was new it may have been supplied
with a standard dock adaptor in the packaging. If so, t the
adaptor by pressing it gently into the Docking Bay as shown
above.
NOTE: Do not dock an iPhone/iPod without tting the correct
adaptor, you may damage the iPhone/iPod and your unit.
CONNECTING OTHER iPod
MODELS (INC SHUFFLE)
Using a 3.5mm stereo jack to jack cable (supplied), •
connect one end of the cable to the headphone socket of
the iPhone/iPod, and the other end to the Aux In jack on
the back panel.
To listen to your iPhone/iPod, follow the instructions on •
page 10 for playing equipment connected to the Aux In
jack.
NOTE:- The volume control of the iPhone/iPod must be turned
up when playing through the Aux In jack.
Headphone socket
To the Aux In jack
Docking Connector
iPhone/iPod
adaptor
Docking bay
Before docking your iPhone/iPod, you must rst t the
correct adaptor to the docking bay. Each iPhone/iPod
adaptor matches the shape of a particular iPhone/iPod and
is necessary to ensure that your iPhone/iPod is securely held
when docked.