Technika CR-109IDAB MP3 Docking Station User Manual


 
14
FM SETTINGS MENU
There are also some menu settings that are specic to FM
radio operation. These settings may be changed through the
Settings Menu.
To enter the FM Settings Menu:
Set to FM mode.•
Press the • MENU//STANDBY button on the top panel or
the MENU button on the remote control.
A map of the menu is shown below. To scroll through available
options, press the M or UP buttons. To choose an option from
the menu, press the SELECT/ENTER button.
MORE DETAIL OF THE FM SETTINGS MENU OPTIONS
SCAN SETTING: With this menu option you can set the
scanning sensitivity of the FM radio to two dierent levels-
‘Strong stations only’ or ‘All stations’. Setting to ‘Strong
stations only’ will exclude weaker stations resulting in a
quicker scan. If you set to ‘All stations’ the scan will stop at
every station detected, even if the signal is weak.
AUDIO SETTINGS: This option enables you to set the radio
to receive FM in Auto mode (Mono/Stereo) or in Mono only.
This may be useful if the signal is weak and the broadcast
is noisy.
FM SETTINGS MENU SLEEP FUNCTION
SLEEP TIMER
You can set the Sleep timer to play music for a set period
while you are falling asleep.
To set the sleep timer:
Play your choice of music.•
Press the • SLEEP button on the remote control repeatedly
to cycle through the sleep time options of 15 minutes, 30
minutes, 45 minutes, 60 minutes or OFF (sleep o).
The music will continue to play for the time you selected, then
the unit will set to Standby.
NOTE:- Sleep time can also be set through the Settings Menu
if the remote control is not available.
HEADPHONES
There is a headphone output jack on the back panel of the
radio. If headphones are connected to this socket for private
listening, the speakers will cut out automatically.