8
LISTENING TO FM RADIO STATION PRESETS
DAB and FM presets
Your radio can store up to 10 of your favourite stations as
presets on both the DAB and FM bands for quick recall. The
remote control includes direct access number keys for Presets
1 to 6. For this reason you may prefer to store your most-used
stations in Presets 1 to 6.
To quick store preset 1 to 6
Tune to the station you want to store as a preset. •
Press and • hold one of the NUMBER buttons on the
remote control.
To recall a preset 1 to 6
Press one of the • NUMBER buttons on the remote control
briey.
The preset station will be tuned. If the preset location
selected is empty, then the radio will continue to play the
last selected station.
To store any preset 1-10 (top panel or remote control)
Tune to the station you want to store as a preset.•
Press the • }/PRESET button.
Press the • M/UP or N/DOWN button repeatedly to
nd the preset number you want to store.
Press and • hold the SELECT button to conrm and store
the preset.
To recall any preset 1-10
Press the • }/PRESET button.
Press the • M/UP or N/DOWN repeatedly to nd the
preset number you want to play.
Press the • SELECT button briey to play the preset.
SOUND SOURCES
You can choose to listen to the following sources -
DAB radio•
FM radio•
iPod (when docked)•
Aux source (when connected via the rear panel AUX •
jack).
Selecting a source:
Press the • FUNCTION button on the top panel or remote
control repeatedly to scroll through the available
sources.
Your radio can also receive FM band radio stations and display
RDS data (where broadcast).
To change to the FM band
Press the • FUNCTION button repeatedly to select FM
mode.
To auto-tune to FM stations
Press and • hold the UP or DOWN button on the top panel
(or the M or N button on the remote control) to search
for the next station in the band.
The radio will search in the direction indicated and the tuning
frequency will be displayed whilst searching.
When a usable station is detected the radio will stop tuning and
play the station. If RDS data is present, the station name and
scrolling radio text will be displayed. If RDS data is not present,
the tuned frequency will be displayed.
To manually tune to FM stations
Press the • UP or DOWN button on the top panel briey
(or the M or N button on the remote control) to tune
the band in 50kHz steps.
STEREO/MONO RECEPTION
You can set your radio to switch automatically between
stereo and mono FM reception (Mono/Stereo mode) or to
receive in mono only (Mono Only mode). Setting to Mono
Only mode may improve sound quality in areas where a weak
aerial signal results in a high level of background noise. FM
audio mode selection is made via Audio Setting in the FM
menu. Refer to the FM Settings Menu section on page 14 for
more details of the FM menu.
SELECTING A SOURCE