Filter
Top Products
TASCAM HD-P2 Owner's Manual 17
HD-P2 Screens and Menus
Change/New Project
By default the HD-P2 automatically makes the rst
project whenever new media is used. To make addi-
tional projects, or switch between projects, use the
Change/New Project menu from the Main menu.
In Figure 18 the menu shows the currently loaded
project (Project 09) and any other projects on this
Compact Flash card. If you select a non-loaded proj-
ect, like Project 02, the sub-menu provides the choices
of
Loading
the project or
Deleting
. Deleting a project
permanently removes all audio les and settings and
cannot be undone.
Figure 18 - Change or New Project Screen
If you select Create New Project you are prompted
to choose a Project Template as in Figure 19. The
Default Template is based on the Default Project
Settings in the System Menu. There may also be a list
of templates that you have saved from other projects,
like the le
Proj0900
shown in Figure 19.
Figure 19 - Choose Template for New Project Screen
System Menus
System Settings
Figure 20 - System Menu Settings Screen
The System Menu can be accessed at all times, with
or without a Compact Flash card inserted. It controls
overall settings, information, and tools related to the
HD-P2 system as a whole.
Set System Time
– Set the HD-P2’s internal real-time
clock with date and time.
Audible Alerts
– When the HD-P2 detects low power
or low disk space it will pop up warnings on the
screen. If this choice is set to
On
it will also send
beep tones to the audio output. These are not re-
corded.
Power Management
– Shows the current voltage levels
of AC, FireWire, and Battery power sources.
Audio Clock Information
– Displays the measured types
and values of the
Word Clock
,
LTC
,
S/PDIF
, and
Internal
clocks. Also shows alerts and provides a reset
mechanism
Media Management
– All media-related tools and in-
formation screens (i.e.
Get Info
,
Clean-up
,
Scan
,
Erase
and
Format
).
Software Update
– Used to check the current software
version and to install software updates.
Default Project Settings
– Settings used by default when
a new project is created.
Project Templates
– List of saved project templates
along with menus to delete, or rename them.
Default Project Settings and Project Templates are
stored on the CF card internally. These sections
remain active if a CF card is not present.