Filter
Top Products
My system crashes during boot up with the Card connector
installed?
Can two separate displays be connected to the ExpressCard
Docking station (VGA and DVI-D) and display two separate
images or work to extend the display across three screens
(including the Notebooks screen)?
No. The output from the VGA port and the DVI port are the same.
Try switching the Pre-boot switch to the on position and boot again.
Audio
I cannot hear anything through my Notebook's Speakers.
Some Notebooks default to the ExpressCard Docking station's
onboard USB Audio device when the Docking station is connected,
disabling your notebook's built in speakers. To enable your Notebook's
speakers, do the following:
1. Open the Control Panel, and select "sounds and Audio Devices".
2. On the "Audio" Tab under the "Sound Playback" section, select
your Notebook's internal Audio device (will be a device other than
the USB Audio device of the Docking Station).
If you still cannot get the Audio device to Play from your speakers:
1. Open the Control Panel, and select "sounds and Audio Devices".
2. On the "Audio" Tab under the "Device Volume" section, click
"Advanced".
3. Uncheck the "Mute All" box
NOTE: YOU WILL NEED TO CLOSE ANY APPLICATIONS THAT ARE USING
AUDIO AND RESTART THEM IN ORDER TO ENABLE THIS CHANGE.
Targus ExpressCard Notebook Docking Station with Digital Video and Audio
My screen becomes blank (black) when I connect the Express-
Card to my computer.
Make sure the ExpressCard is properly connected and check the
display mode in the system tray so that the setting is correct.
22