Filter
Top Products
96126 Second Edition 3
StorageTek Proprietary
Introduction
If installing through a switch, you may need a set of the following.
Check your quantities against your earlier distance measurements to ensure
your order includes all cable attachments. Also, if ordering copper cables,
make sure that the connector ends meet your need. One end mates with the
HBA, and the other end, typically, mates with the control module’s host
interface minihubs (or array module host ports).
Note: Unless there is an existing management station, cable connections to
the management station should be via 10BaseT Ethernet.
Typically, LC to LC Duplex Fibre Channel short wave optical cables are used
with the HBAs and the controller’s host minihubs, which have Small Form
Factor Packaged (SFP) Transceivers.
Place your Order
Make sure that you have the following.
When you make a new order, a CD-ROM along with a CD insert, commonly
called a Quick Start Guide will be in your host attach kit. The Quick Start Guide
will walk you through your installation—first referring you to the
Preconfiguration and Maintenance Setup Instructions, P/N 95966, and then to
any special instructions written to support your particular operating system
installation.
Quantity FC Optical Cable Description Part #
10 meters (32.8 feet) LC to SC 10800231
50 meters (164 feet) LC to SC 10800232
100 meters (328 feet) LC to SC 10800233
Quantity 1 Gb FC Optical Cable Description Part #
10 meters (32.8 feet) SC to SC Duplex 10800134
50 meters (164 feet) SC to SC Duplex 10800137
100 meters (328 feet) SC to SC Duplex 10800138
Note: Other lengths are available. Consult the Siebel Configurator.
✔ Description
SUN Server running Solaris 2.7, 8, or 9 (and appropriate patches)
HBA(s)
Fibre Channel cables to configure your subsystem