Filter
Top Products
96126 Second Edition 7
StorageTek Proprietary
Installation
Install the Host Bus Adapters (HBAs)
The following steps explain how to install the host adapters.
1. Quit any applications that are running and halt (down) the operating
system.
Note: If your server supports, Hot Add PCI, refer to your hardware
manuals for specific instructions.
2. Power off the Solaris host, as appropriate.
3. Install the host bus adapter onto the host.
Note: There are various types of Solaris servers. Locate the
I/O card, which may be on a card module or behind an access
panel. See examples below.
4. Power up the host.
Install HBA Drivers
Install the driver according to the instructions that came with the HBA, and
modify the configuration file in the /kernel/drv directory, as appropriate.
Refer to the Interop Tool for the latest connectivity information. See page 2.
Install Storage Manager components
Refer to the SANtricity Storage Manager version 9.1 Installation Guide for
Solaris. The Storage Manager components are located on the CD that comes
with your host attach kit.
Note: Before you reboot (as mentioned at the end of the Installation Guide
procedures), install the Fibre Channel cables as instructed in the
following section.