Filter
Top Products
25
21. AUDIO OUT-SOCKETS This analogue
signal requires RCA (left & right) connections.
Connect this output to the respective input of
your mixer (Line/Aux).
22. DIGITAL OUT-SOCKET This digital signal
requires one SP/DIF (75 Ohm) connection. Connect
this output to the respective input of your mixer /
computer.
23. RELAY SOCKET Via the RELAY SOCKET, two
CD players can be linked (connected) for relay play. If
you connect to a mixer which supports fader start,
you can also relay play via mixer’s cross-fader.
24. POWER SWITCH Press this button to activate
the unit.(i.e. Power ON/OFF)
25. AC CONNECTION Plug in the power supply
cable here.
14
1. TRACK Shows the current track selected /
playing.
2. SINGLE Shows when the unit is set to play just
one track at a time. When this is not lit the CD will
play continuously through all tracks. The function is
controlled by the SGL/CTN button.
3. LOOP Shows when the CD is in LOOP mode;
repeating a particular area of music on the CD.
4. RELOOP Shows when the CD has had a loop set
previously and that the loop is ready to be played
again.
5. ELAPSED, TOTAL REMAIN Indicates the time
shown on the display is either ELAPSED, TOTAL
REMAINING or the single song remaining time.
6. MINUTE, SECOND, FRAME Displays the time of
track(s) currently selected in increments of Minutes,
Seconds, and Frames.
7. TIME BAR Shows either time remaining or
elapsed depending on the setting of the TIME button.
8. PITCH Indicator light to show when pitch is
displayed.
9. PITCH Shows the numerical percentage of the
song.
10. ANTI SHOCK AND BUFFER INDICATOR
Indicates the current status of the Buffer Memory. This
is represented on the display by a bucket being filled
or emptied. The bucket itself represents the instant
start function (which works by buffer memory). If the
bucket is flashing, the instant start is not available.
Each bar within the bucket represents 2 seconds of
anti shock protection. There is up to 10 seconds of
anti shock available.
11. CUE Indicates the unit is at a cue point and is
ready to play.
12. PAUSE Indicates the unit is in CUE/ PAUSE
mode.
13. PLAY Indicates the unit is currently playing a CD.
14. WHEEL INDICATOR A visual representation of a
vinyl marker, indicating play position in frames. This
wheel rotates during playback and stops during pause
and also indicates direction (fwd/rev).
AUDIO OUT
DIGITAL
OUT
POWER
ON
OFF
RELAY
21 22 23 24 25
1
2
3
4
5
6
7
8
9
101112
13
14
LCD Display