Filter
Top Products
ICD-UX60/UX70/UX80 GB 3-283-649-11(1)
12
GB
When the remaining battery/charging
indicator indicates “ ,” charging is
completed. (Charging time: approx. 8
hours*)
When you use the IC recorder for the
rst time, or after you have not used
the IC recorder for a certain time, it is
recommended that you charge the
battery repeatedly until “ ” is displayed.
If the remaining battery/charging
indicator is not displayed, charging has
not been done properly. Proceed from
step 1 again.
* This is an approximation for the time it takes
to charge from no remaining battery power
to full battery power at room temperature.
It varies depending on the remaining power
and the condition of the battery. It also takes
more time if the temperature of the battery
is low, or if the battery is charged while you
are transferring data to the IC recorder.
If the IC recorder cannot be connected to
your computer directly, use the supplied
USB connection support cable.
Tip
You can charge the rechargeable battery
by connecting the IC recorder to an AC
outlet using a USB AC adaptor (not supplied)
(page 60).
Notes
While “ ” or “ ” is flashing instead
of the remaining battery/charging indicator,
you cannot charge the battery. Charge
the battery in an environment with a
temperature of 5 °C - 35 °C.
If “USB CHARGE” in the “DETAIL MENU” menu
is set to “OFF,” you cannot charge the battery
using your computer. Set “USB CHARGE” to
“ON” (page 43).
Do not use manganese battery for this IC
recorder.
During playback using the built-in speaker,
you cannot charge the battery.
When you use the IC recorder with a
rechargeable battery, the remaining battery/
charging indicator may not light fully.
Clock setting display appears and the
year section ashes when you insert
battery for the rst time, or when you
insert battery after the IC recorder has
been without battery for a certain period
of time. Please refer to step 3 in “Step 2:
Setting the Clock” on page 16 to set the
date and time.