Filter
Top Products
29
Adjusting the settings of your Network Walkman
Switching to the
manual mode
1 Press the MENU button.
The menu screen is displayed.
2 Rotate the Shuttle switch to select
“VOL: SET.”
VOL :SET>
3 Press the Nx button to confirm.
“SET >” blinks.
4 Rotate the Shuttle switch to select
“MAN.”
VOL :MAN
5 Press the Nx button to confirm.
6 Press the MENU button.
The display returns to the normal screen.
With this setting, you can adjust the
volume level by pressing the volume
button.
3 Press the Nx button to confirm.
“MAN” blinks.
4 Rotate the Shuttle switch to select
“SET >.”
VOL :SET>
5 Press the Nx button to confirm.
“VOL LO xx”* blinks.
*“xx” stands for numeric values of the
volume level.
VOL LO xx
6 Set volume levels of three preset
levels: LO, MID, or HI.
1 Press the VOLUME +/– button to set
the volume level of the LO preset.
2 Rotate the Shuttle switch to select
“VOL MID xx,” and then press the
VOLUME +/– button to set the
volume level of the MID preset.
3 Rotate the Shuttle switch to select
“VOL HI xx,” and then press the
VOLUME +/– button to set the
volume level of the HI preset.
7 Press the Nx button to confirm.
8 Press the MENU button.
The display returns to the normal screen.
With these settings, you can adjust the
volume level to any of three preset
levels: LO, MID, or HI.
To cancel the menu mode
Select [RETURN] in the menu screen or press the
MENU button.
Note
If AVLS (page 27) is set, the actual volume may be
lower than the settings.