Filter
Top Products
27
Adjusting the settings of your Network Walkman
Limiting the
volume (AVLS)
You can set AVLS (Automatic Volume
Limiter System) to limit the maximum
volume to prevent auditory disturbance or
distraction. With AVLS, you can listen to
music at a comfortable volume level.
1 Press the MENU button.
The menu screen is displayed.
REPEAT MODE>
2 Rotate the Shuttle switch to select
“AVLS” and press the Nx button
to confirm.
“OFF” blinks.
AVLS :OFF
3 Rotate the Shuttle switch to select
“ON” and press the Nx button
to confirm.
The (AVLS) indication is displayed.
The volume is kept at a moderate level.
4 Press the MENU button.
G
r
o
u
p
M
o
d
e
o
d
e
Shuttle switch
Press
(Confirm)
Nx button
MENU button
to (+/>)
to (./–)
To cancel the menu mode
Select [RETURN] in the menu screen or press the
MENU button.
To display the current time
Press the MENU button and hold it.
You can display the current time while pressing the
button.
Notes
• If the unit is not used for a long time, your
settings of the date and time may be reset.
• If the current time is not set, the display for the
date and time will be “-- --.”
• If PC CLK is set to “ON” (page 25), the time
setting of your Network Walkman is
automatically adjusted to a computer’s built-in
clock when your Network Walkman is connected
to the computer.
• Depending on the shipping area, the time display
format of the unit is set to a 12-hour display or a
24-hour display.
You cannot switch between a 12-hour display and
a 24-hour display in the unit.
A 24-hour display is shown in this manual.
continued