Filter
Top Products
23-GB
Checking the remaining
time or the playing
position
You can check the track name, disc name,
etc. during playback.
1 While the recorder is playing, press
ENTER, press >MENU.
repeatedly until “DISP” flashes in the
display, and then press ENTER again.
2 Press >MENU. repeatedly
until the information you want flashes
in the display.
Each time you press MENU., the
display changes as follows.
LapTim (erapsed time)
r
1 Rem (remaining time of the
current track)
r
AllRem (remaining time after
current location)
3 Press ENTER.
The display changes as follows.
z
If you want to check the remaining time or the
recording position while recording or in stop
mode, see page 20.
Locking the controls
(HOLD)
To prevent the buttons from being
accidentally operated when you carry the
recorder, use this function.
1 Slide HOLD in the direction of the
..
To unlock the controls
Slide HOLD in the opposite direction of
the arrow.
AB
Elapsed time Track number
ENTER
>MENU.
A B
Remaining time of
the current track
Track name
1)
Remaining time
after the current
location
Disc name
1)
1)
Appears only if the track has been labeled.
AB
HOLD