Filter
Top Products
20-GB
Checking the remaining
time or the recording
position
You can check the remaining time, track
number, etc. when recording or during
stop.
1 While the recorder is recording or
stopped, press ENTER, press
>MENU. repeatedly until
“DISP” flashes in the display, and
then press ENTER again.
2 Press >MENU. repeatedly
until the information you want flashes
in the display.
Each time you press MENU., the
display changes as follows.
LapTim (elapsed time)
r
RecRem (remaining time for
recording)
1)
r
AllRem (remaining time after
the current location)
2)
1)
“REC REMAIN” start flashing in the display
when the remaining time for recording
become 3 minutes or less.
2)
Appears only when the recorder is stopped.
3 Press ENTER.
The display changes as follows.
z
If you want to check the playing position or
track name while playing, see page 23.
>MENU.
ENTER
AB
Elapsed time Track number
Remaining time for
recording
Track name
1)
1)
Appears only if the track has been labeled.
Remaining time
after the current
location
Disc name
1)
A B