Filter
Top Products
16-GB
Recording with analog
input (line cable
required)
The sound will sent from the connected
equipment as analog signal but will be
recorded digitally on the disc.
1 Insert a recordable MD and start
recording.
For recording operations, see
“Recording an MD right away!”
(page 10). To record from a portable
CD player, set the CD player to pause
and then start recording.
LINE IN (OPTICAL) jack is for both
digital and analog input
The recorder automatically recognizes the type
of line cable and switches to digital or analog
input.
Note
A track mark is added at the point where you
press X again to resume recording while
pausing recording; thus the track will be
counted as a new track.
Recording for long
times
Select each recording mode according to
the recording time that you want.
Stereo recording is possible at 2 times
(LP2) or 4 times (LP4) the normal
recording time.
MDs recorded in monaural, LP2 or LP4
mode can be played back only on MD
players or recorders with monaural, LP2
or LP4 playback mode.
1 Press ENTER, press
>MENU. repeatedly until “R-
MODE” flashes in the display, and
then press ENTER again.
to LINE IN (OPTICAL)
Line cable
(RK-G129,
not supplied)*
CD player,
cassette recorder,
etc.
to LINE OUT
L (white)
R (red)
∗ Use the connecting cords without an
attenuator. To connect to a component
such as a portable CD player having a
stereo mini-jack, use the RK-G136
connecting cord (not supplied).
>MENU.
N
ENTER
REC