Sony MZ-R70 MP3 Player User Manual


 
66
Hi DC in Voltage of the power supply is too high (The
supplied AC power adaptor or the recommended
car battery cord is not used).
, Use the supplied AC power adaptor or the
recommended car battery cord.
HOLD The recorder is locked.
, Slide HOLD against the arrow to unlock the
recorder (page 37).
LOW BATT Batteries are weak.
, Charge the rechargeable battery or replace the
dry battery (page 53).
MEM OVER You tried to record with the recorder placed where
it receives continuous vibration.
, Put the recorder on a stable place, and start
recording again.
NO COPY You tried to make a copy from a disc that is
protected by the Serial Copy Management
System. You cannot make copies from a digitally
connected source which was itself recorded using
digital connection.
, Use analog connection instead (page 18).
NO DISC You tried to play or record with no disc in the
recorder.
, Insert an MD.
NO SIGNAL The recorder could not detect digital input
signals.
, Make sure that the source is connected firmly
(page 8).
P/B ONLY You tried to record or edit on a premastered MD
(P/B stands for playback).
, Insert a recordable MD.
PROTECTED You tried to record or edit on a MD with the tab in
the record-protect position.
, Slide the tab back (page 58).
Error
message
Meaning/Remedy