Sony MZ-R70 MP3 Player User Manual


 
20
z
You cannot pause manually during synchro-recording.
When there is no sound from the player for more than 3 seconds during
synchro-recording, the recorder goes into the standby mode automatically.
When the sound comes from the player again, the recorder resumes synchro-
recording. If the recorder is kept in the standby mode for 5 minutes or longer,
the recorder stops automatically.
Notes
Do not switch SYNCHRO REC after step 3. Recording may not be done
properly.
When recording in monaural, follow steps 1 to 3 of Recording in monaural
for double the normal recording time (page 22), and then do steps 1 and 3 of
synchro-recording.
Even when there is no recorded sound on the sound source, there may be
cases when recording does not pause automatically during synchro-recording
due to the noise level emitted from the sound source.
If a silent portion is encountered for 2 seconds or more during synchro-
recording, a new track mark is automatically added at the point where the
silent portion ends.
Synchro-recording cannot be done if the connecting cord is not an optical
cable, or if the cable is connected to the MIC (PLUG IN POWER) jack.
You cannot adjust the recording level manually during synchro-recording.