65
Messages
If the following error messages flash in the display window, check
the chart below.
Error
message
Meaning/Remedy
BLANKDISC • An MD with no recording on it is inserted.
, Insert a recorded MD.
DISC ERR • The disc is damaged or does not contain proper
recording or editing data.
, Reinsert the disc. If this fails, rerecord.
DISC FULL • There is no more space to record on the disc (less
than 12 seconds available).
, Replace the disc.
Data Save • The MD player is recording information (sounds)
from the memory to the disk.
, Wait until this process is completed. Do not
expose the player to any physical shock, nor
disrupt power supply.
TOC Edit • The MD player is recording information (track
start and end position) from the memory to the
disk.
, Wait until this process is completed. Do not
expose the player to physical shock, nor
disrupt power supply.
BUSY • You tried to operate the recorder while it was
accessing the recorded data.
, Wait until the message goes out (in rare cases,
it may take 2–3 minutes).
NAME FULL • You tried to enter more than 200 letters to label a
single track or disc.
• You tried to enter a total of more than 1700 letters
for track or disc names during playback or stop.
, Enter the characters within the limit.