Filter
Top Products
29
3
Connect the AC power adaptor to
the DC IN 3 V jack of the supplied
charging stand and an AC outlet.
Then place the CD player on the
supplied charging stand (page 14).
Charging of the battery starts.
In the display of the remote control,
“Charging” indication flashes and the
indicator sections of light up in
succession. The OPERATION lamp
lights up on the CD player.
When the battery is completely charged,
all indications on the display disappear
and the OPERATION lamp goes off.
Notes on the supplied charging stand
• The supplied charging stand can be used
only with this CD player. No other model
can be charged using this stand.
• When using the supplied charging stand,
charge the rechargeable battery only. Do
not charge any other battery.
OPERATION
lamp
to DC IN 3V
on the
charging
stand
• During charging, the CD player and the
rechargeable battery become hot. This
poses no danger.
• Do not place coins or other metallic
objects on the charging stand. If the
terminal on the charging stand is
accidentally brought into contact with a
metallic object, it may short-circuit and
begin to heat up.
To charge the rechargeable battery
without using the supplied charging
stand
1 Perform steps 1 and 2 of “Using the dry
battery” (page 30) to attach the external
battery case to the CD player.
2 While keeping sliding the switch on the
external battery case in the direction of
the arrow, connect the AC power adaptor.
3 Press x/CHG.
Charging starts.
to an AC outlet
AC power adaptor
OPERATION
lamp
AC power adaptor
to an AC outlet
DC IN 3 V
x/CHG
Connecting to a power source
(Continued)