Sony NW-E3 MP3 Player User Manual


 
12
Basic Operations
Transferring music data from the computer
to Network Walkman (Check-Out)
This section describes how to record the contents of a compact disc onto the hard drive of your
computer, and then how to transfer it to Network Walkman (Check-Out).
You can also download by using EMD Services, or convert MP3 files and WAV format audio
files. Please refer to the online help for more information.
1 Connect Network Walkman to your computer.
Connect the wide connector of the supplied dedicated USB cable into the dedicated USB jack on Network
Walkman, then the narrow connector to the USB jack of your computer.
“CONNECT” appears in the display.
To remove the USB connector from Network Walkman
While pressing the buttons on both sides of the connector, pull it out.
Notes
• Do not connect more than two USB devices to your computer. Normal operation will not be guaranteed.
• Use of this player with a USB hub or a USB extension cable is not guaranteed.
• A malfunction may occur depending on the USB devices connected at any one time.
• Be sure to insert the battery into Network Walkman when connecting it to your computer.
• When connecting Network Walkman to your computer for the first time, the USB driver Installer window
appears. Please follow the instructions in the Installer window.
•Connect Network Walkman only as necessary. Disconnect the dedicated USB cable while you do not use
Network Walkman with the computer connected.
Dedicated USB cable (supplied)
to the USB jack
to the dedicated
USB jack