Filter
Top Products
10
Step 3: Installing the OpenMG Jukebox
software
This section describes how to install the OpenMG Jukebox software to your computer. Before
installation, turn on your computer, and start Windows 98.
Note
Be sure to install the software before connecting Network Walkman with the supplied dedicated USB cable.
Do not install the software while connecting the dedicated USB cable. Connect the dedicated USB cable only
after you have restarted the computer after installation.
1 Insert the supplied CD-ROM into the CD-ROM drive of your computer.
The Setup program automatically starts and the following window appears. If the program
does not start, double-click [Setup.exe].
2 Follow the instructions in the Installer window to complete the installation.
When the Input window for the CD key appears, input the CD key written on the CD-ROM
case label.
When the installation is finished, the following dialog box appears in the display.
Click [Finish] to restart the computer.
Note
Do not delete, move or modify the installed folder.
About the “OpenMG(NW-E3&E2) Registration” icon on the desktop
When you restart the computer after installing the software, the “OpenMG(NW-E3&E2)
Registration” icon will appear on the desktop. Make sure that you can connect to Internet, then
double-click this icon to start customer registration for this product (Network Walkman) and for
the EMD services.
For details on registration, refer to the supplied leaflet in the box.