Sony NWZ-B133 MP3 Player User Manual


 
NWZ-B133 / B135 / B133F / B135F. GB. 3-877-773-11(1)
10
11
NWZ-B133 / B135 / B133F / B135F. GB. 3-877-773-11(1)
USB cap
Remove the USB cap and connect the USB
connector of the player to a USB connector
on your computer.
To remove the USB cap
Remove the USB cap as shown below.
RESET button (
page 47)
Resets the player when you press the RESET
button with a small pin, etc.
When you turn on the player after resetting
it, the player reactivates the previously set
items.
Strap hole
This is used to attach a strap (sold
separately).
HOLD switch
You can protect the player against accidental
operation by using the HOLD switch when
carrying it.
By sliding the HOLD switch in the direction
of the arrow (
), all the buttons are
inoperable. If you press buttons while the
HOLD function is activated, “HOLD” and
the current time appears in the display. (The
current time appears only when the clock is
set (
page 44).)
If you slide the HOLD switch to the opposite
position, the HOLD function is released.
RearFront
REC/STOP button (
pages 36, 39)
Starts/stops recording. You can record the
sound from the microphone or the currently
received FM program (NWZ-B133F/B135F
only).
VOL +*
1
/– button
Adjusts the volume.
BASS button
(
page 28)
Activates the Bass function to emphasize the
low sound range.
*
1
button (
pages 13, 19)
Turns on/off the player (
page 16).
Starts/pauses song playback, or pauses/restarts
recording. When a menu appears on the display,
use this button to confirm the menu item.
/ button (
pages 13, 23)
Selects a song, album, artist, folder or menu
item. You can also skip to the beginning of
the song/album/artist/folder, fast-forward or
fast-rewind.
Parts and Controls
Power Illuminator
Illuminated by LED (
page 44). The
pattern of the illumination varies according
to the operation.
BACK/HOME*
2
button (
page 13)
Returns to the previous menu. Press and hold
this button to display the HOME menu.
Display (
page 22)
Microphone (
page 39)
(Headphone) jack
When connecting the headphones, insert the
plug until it clicks into place. If connected
improperly, it may not sound right.
*
1
There are tactile dots. Use them to help with
button operations.
*
2
Functions which are marked
near the buttons
are activated if you press them. Likewise
functions marked
near the buttons, are
activated if you press and hold them.
Headphones
USB connector