Sony NWZ-B133 MP3 Player User Manual


 
NWZ-B133 / B135 / B133F / B135F. GB. 3-877-773-11(1)
56
57
NWZ-B133 / B135 / B133F / B135F. GB. 3-877-773-11(1)
Troubleshooting (continued)
Symptom Cause/Remedy
Only a small number of songs
can be transferred to the player.
There is n
ot enough free space in the built-in flash memory.
Delete unnecessary songs to increase free space.
Non-audio data is stored in the built-in flash memory.
Move non-audio files to the computer to increase free space.
The player becomes unstable
while it is connected to the
computer.
A USB hub i
s being used.
Connect the player directly to a USB port, as connection via a
USB hub may not work. However, a USB hub that supplies
power can be used.
FM Tuner (NWZ-B133F/B135F only)
Symptom Cause/Remedy
You cannot hear the FM
broadcast well.
The recei
ving frequency is not fully tuned in.
Select the frequency manually to improve reception (
page
29).
Reception is weak and sound
quality is poor.
The radio signa
l is weak.
Listen to the FM broadcast near a window since the signal
may be weak inside buildings or vehicles.
The head
phone cord is not extended enough.
The headphone cord functions as an antenna. Extend the
headphone cord as far as possible.
The FM broadcast is affected by
interference.
A device emitting radio signals, such as a mobile phone is being
used near the player.
When using such devices as mobile phones, keep them away
from the player.
Other
Symptom Cause/Remedy
There is no beep sound when the
player is operated.
“Beep
” is set to “Beep OFF.”
Set “Beep” to “Beep ON” (
page 44).
The player gets warm. The pla
yer may be warm when the battery is being charged and
just after charging. The player also may become warm when a
large amount of files are transferred. This is normal and is not
cause for concern. Set the player aside for a while to allow it to
cool down.
The date and time have been
reset.
I
f you lef
t the player for a while with the battery used up, the
date and time may be reset.
This is not a malfunction. Charge the battery until
appears on the screen (
page 14) and set the date and time
again (
page 44).
All settings of the player have
been reset.
Y
ou mo
ved, deleted, or renamed the system files. Or, the built-in
flash memory of the player was formatted using other than the
“Format” menu of the player.
If you do any of the above operations, the system will be
restructured and all settings of the player will be reset when
you disconnect the player from the computer or other devices.
If the player does not function normally after you format the
player using other than the “Format” menu of the player,
format the built-in flash memory using the “Format” menu of
the player (
page 46).
Continued
Troubleshooting
Connection with the computer (continued)