Filter
Top Products
60
Labeling recordings
See the illustration in the Japanese text
(page 26).
You can label the MDs and tracks you
recorded with letters, numbers, and marks.
Each label can be made up of up to 200
characters, and each MD can include up to
1700 character.
1 To label a track, play the track you
want to label.
To label an MD, insert the recordable
MD you want to label.
If an MD is already inserted, press p
to stop.
2 Press the (title/enter)
button on the recorder. A set of
characters appears on the display. To
select a different set of characters,
press the
(Katakana/English/symbols/title
samples) button to change the display.
Each time you press this button the
display changes in the order of
katakana characters, English letters,
symbols, and title samples.
When playing a track, the recorder
plays the track repeatedly.
Erasing a track mark
See the illustrations in the Japanese text
(page24).
When you record with analog (line) input,
unnecessary track marks may be recorded.
You can erase a track mark to combine the
tracks before and after the track mark.
1 While the recorder is playing an MD,
press P to pause.
2 Find the track mark you want to erase
by pressing = or + slightly.
"00:00" flashes in the display.
3 Press the (track mark)
button to erase the mark.
The track mark is erased and the two
tracks are combined. The number of
the newly combined track will be that
of the first track and the succeeding
tracks will be renumbered.
To erase other marks, repeat 2 and 3.
Moving recorded tracks
See the illustrations in the Japanese text
(page 25).
You can change the order of the recorded
tracks.
1 Play the track you want to move.
2 While playing the track you want
move, press the (move/
insert) button. The recorder plays the
selected track repeatedly.
3 Press the CURSOR button to select the
new track position.
4 Press the (title/enter)
button again.
Moving is completed and the recorder
plays the moved track.
3 Press the CURSOR button to select a
character.
The CURSOR button moves the cursor
up/down or right/left.
The (position) button
moves the cursor right or left.
Press the (enter) button to finalize
your selection.
Press the (move/insert)
button for a space.
Press the (erase/delete)
button to delete a character.
Press p to stop labeling.
* When you use Katakana, press the
CURSOR to change the display
as follows:
4 Repeat step 3 until you have entered
all the characters for the label.
5 Press the (title/enter)
button to finish labeling.