Filter
Top Products
6
1 Press CLOCK TIMER SET.
The hour indication flashes.
2 Turn the jog dial to set the hour.
The clock is on a 24-hour system.
3 Press ENTER/NEXT.
The minutes indication flashes.
4 Turn the jog dial to set the minutes.
5 Press ENTER/NEXT.
The clock starts working.
Tips
•If you’ve made a mistake, start over from step 1.
•Setting the time deactivates the demo mode.
If you want to display the demo mode, press
DISPLAY/DEMO when the system is off.
Note
When setting the time, set the equalizer display to
anything other than Spectrum analyzer pattern 3.
(See “To change the equalizer display” on page 28.)
Step 2: Setting the
time
You must set the time before using the timer
functions.
1 3,52,4
POWER
1263,54
TUNED
STEREO
MHz
VOLUME
AUTO
Preset number
TUNED
STEREO
VOLUME
AUTO
n
Step 3: Presetting
radio stations
You can preset up to 40 stations, 20 for FM, 10
for MW and 10 for SW.
1 Press TUNER BAND repeatedly
until the band you want appears in
the display.
Every time you press this button, the
band changes as follows:
FM n MW n SW
2 Press TUNING MODE repeatedly to
select “AUTO”.
3 Turn the jog dial.
The frequency indication changes and
scanning stops when the system tunes in
a station. “TUNED” and “STEREO” (for
a stereo program) appear.
4 Press MEMORY.
A preset number appears in the display.