Filter
Top Products
Basic Operations
13
n
n
Turn counter-
clockwise
(or press =
on the remote)
for lower preset
numbers.
TUNED
STEREO
MHz
VOLUME
PRESET
Preset number
Frequency
2 Press TUNING MODE repeatedly
so that “PRESET” appears in the
display.
MANUAL n AUTO n PRESET
3 Turn the jog dial (or press = or
+ on the remote) to tune in the
desired preset station.
To Do this
Turn off the radio Press POWER.
Adjust the volume Turn VOLUME (or press
VOL +/– on the remote).
To listen to non-preset radio
stations
Press TUNING MODE repeatedly so that
“MANUAL” appears in step 2, then tune in
the station by turning the jog dial.
Tips
•Pressing TUNER BAND when the power is off
automatically turns the power on and tunes to the
last received station (One Touch Play).
•You can switch from another source to the radio
just by pressing TUNER BAND (Automatic Source
Selection).
•When an FM program is noisy, press STEREO/
MONO so that “MONO” appears in the display.
There will be no stereo effect, but the reception
will improve. Press the button again to restore the
stereo effect.
•To improve broadcast reception, reorient the
supplied antennas.
Listening to the radio
–– Preset Tuning
Preset radio stations in the tuner's memory
first (see “Step 3: Presetting radio stations”).
Turn clockwise
(or press +
on the remote)
for higher
preset numbers.
+–
=
=
2
13
STEREO/
MONO
VOLUME
v
= +
TUNER BAND
VOL +/–
bB
V
POWER
1 Press TUNER BAND repeatedly
until the band you want appears in
the display.
Every time you press the button, the
band changes as follows:
FM n MW n SW