Filter
Top Products
Getting Started
5
Hookups
• Connecting the deck to an amplifier
Connect the amplifier to the LINE (ANALOG) IN/OUT
jacks using the audio connecting cords (supplied), making
sure to match the color-coded cords to the appropriate
jacks on the components: red (right) to red and white (left)
to white. Be sure to make connections firmly to prevent
hum and noise.
• Connecting the deck to a digital component such as a
CD player, DAT deck, digital amplifier, or another MD
deck
Connect the component through the DIGITAL IN/OUT
connectors with two optical cables (not supplied). Take
the caps off the connectors before plugging in the cables.
z Automatic conversion of digital sampling rates
during recording
A built-in sampling rate converter automatically
converts the sampling frequency of various digital
sources to the 44.1 kHz sampling rate of your MD deck.
This allows you to record sources such as 32- and 48-
kHz DAT or satellite broadcasts, as well as compact
discs and other MDs.
Notes
• If “Din Unlock” or “Cannot Copy” appears in the display,
recording through the digital connector is not possible.
In this case, record the program source through the LINE
(ANALOG) IN jacks with INPUT set to ANALOG.
• When recording through the DIGITAL IN connector, you
cannot adjust the recording level.
Connecting the AC power cord
Connect the AC power cord to a wall outlet.
çç
çç
ç: Signal flow
MD deck
Amplifier
ç
Ç
TAPE / MD
L
R
INOUT
LINE
(ANALOG)
L
R
OUTIN
MD deck Digital component
ç
Ç
DIGITAL
OUTIN
OPTICAL
DIGITAL
OUTIN
çç
çç
ç: Signal flow