Filter
Top Products
– 5 –
FDL-PT222
SECTION 2
DISASSEMBLY
2-1. CABINETS
claw
1. Remove the battery cover 8.
2. Push two claws with a screwdriver or equivalent on the bottom and
remove them.
3. While pushing the rear cabinet, remove claws of joints with
the front cabinet.
4. Insert a screwdriver or equivalent to the gap on the upper side of the
cabinet, and while pushing the lock spring, put it down to the rear cabinet
side.
5. Remove the channel button 2.
6. Disconnect CN501 (for speaker) on the A board.
7. Remove the B board 3 and the A board 4.
8. Remove solder for the lead wire (BLK) 9.
9. Remove a screw (+PTP2X6) 6 secured the T board 5.
10. Release the T1 board 5 from two claws (right and left) on the rear cabinet.
front cabinet
rear cabinet
lock spring
8 battery cover
2 channel button
7 rear cabinet
claw
1 front cabinet
3 B board
5 T1 board
6 screw (+PTP2X6)
4 A board
9 lead wire (BLK)