Filter
Top Products
27
To remove the batteries
Remove the batteries as illustrated below.
When to replace the batteries
You can check the remaining power of the
batteries in the display.
Battery power is full.
r
r
Battery power is getting low.
r
r
Battery power is low.
r
Lo * Batteries are depleted.
* Beep sounds.
When the batteries are depleted, replace both
batteries with new ones.
Notes
• The indicator sections of roughly show the
remaining battery power. One section does not
always indicate one-fourth of the battery power.
• Depending on operating conditions, the indicator
sections of
may increase or decrease.
You can use the following power sources:
• AC power adaptor (see “Playing a VIDEO
CD”)
• LR6 (size AA) alkaline batteries
For the battery life, see “Specifications.”
Using the dry batteries
Use only the following dry battery type for
your player:
• LR6 (size AA) alkaline batteries
Note
Be sure to remove the AC power adaptor when
using the dry batteries.
1
Open the battery compartment lid
inside your player.
2
Insert two alkaline batteries by
matching 3 to the diagram inside
the battery compartment and
close the lid until it clicks into
place.
B
Connecting to a power source
Connecting to a power source
(Continued)