Filter
Top Products
Additional Information
CFD-V20/V30.E_3-859-117-1X.U2/CA2/AU6/E92
20
Troubleshooting
General
Symptom
The power does not come on.
There is no audio.
The audio is weak or has poor
quality.
The picture of your TV becomes
unstable.
The CD does not play/“no disc”
lights in the display even when a
CD is in place.
The sound drops out.
The tape does not move when you
press an operation button.
The REC r button does not
function/The tape does not play.
The tape does not erase completely.
Radio
Remedy
• Connect the AC power cord securely.
• Make sure the batteries are inserted correctly.
• Replace all the batteries with new ones if they
are weak.
• Make sure the FUNCTION selector is set to the
function you want to operate.
• Adjust the volume.
• Unplug the headphones when listening through
speakers.
• Replace all the batteries with new ones if they
are weak.
• Move the player away from the TV.
• If you are listening to an FM program near the
TV with an indoor antenna, move the player
away from the TV.
• Make sure that the CD compartment is closed.
• Place the CD with the label surface up.
• Clean the CD.
• Take out the CD and leave the CD compartment
open for about an hour to dry moisture
condensation.
• Make sure the FUNCTION selector is set to CD.
• Reduce the volume.
• Clean the CD, or replace it if the CD is badly
damaged
• Place the player in a location free from
vibration.
• Close the cassette compartment securely.
• Make sure the safety tab on the cassette is in
place.
• Make sure the FUNCTION selector is set to CD,
AM or FM.
• Clean the erasing heads (see page 22.)
• Replace all the batteries with new ones if they
are weak.
CD Player
Tape Player