Filter
Top Products
15
The CD Player
CFD-V20/V30.E_3-859-117-1X.U2/CA2/AU6/E92
The CD Player
Creating your
own program
(Program Play)
You can arrange the playing order of the
tracks on a CD.
=/+
Tips
• CFD-V30 only:
To create your own
program on the remote,
proceed as follows:
1 Set FUNCTION to
CD on the player.
2 Press MODE until
“PGM” appears in
the display.
3 Press the number
buttons on the
remote for the tracks
you want to program
in the order you
want.
4 Press (.
• You can play the same
program again, since
the program is saved
until you open the CD
compartment or switch
FUNCTION.
• The current program
will be erased if you
switch FUNCTION or
open the CD
compartment.
• You can record your
own program. After
you’ve created the
program, insert a blank
tape and press r to
start recording.
1 Set FUNCTION to CD.
2 Press PLAY MODE until “PGM” appears in the
display.
3 Press the = or + then press DISPLAY/
ENTER for the tracks you want to program in the
order you want. You can program up to 20 tracks.
4 Press ^ to start program play.
To cancel Program Play
Press PLAY MODE until “PGM” disappears from the
display.
To check the order of tracks before play
Press DISPLAY/ENTER.
Every time you press the button, the track number
appears in the programed order.
To change the current program
Press p once if the CD is stopped and twice if the CD
is playing. The current program will be erased. Then
create a new program following the programing
procedure.
^
FUNCTION
PLAY
MODE
DISPLAY/
ENTER
Programed track
Playing order