Filter
Top Products
157
Troubleshooting Поиск и устранение неисправностей
Symptom Cause and/or Corrective Actions
• Moisture condensation has occurred.
c Remove the cassette and leave your camcorder for at least
1 hour to acclimate. (p. 179)
• Some troubles have occurred in your camcorder.
c Remove the cassette and insert it again, then operate your
camcorder.
• Disconnect the power code of the AC power adaptor or remove
the battery pack, then reconnect it after about 1 minute. Turn
the power on (p. 18, 23). If the functions still do not work, press
RESET using a sharp-pointed object. (If you press RESET, all
the settings including the date and time return to the default.)
(p. 196)
• The AC power adaptor is disconnected.
c Connect it firmly. (p. 23)
• The battery pack is not installed properly.
c Install it properly.
• Something is wrong with the battery pack.
c Contact your Sony dealer or local authorised Sony service
facility.
• The POWER switch is not set to OFF (CHG).
c Set it to OFF (CHG).
• Set the date and time. (p. 25)The date or time indicator does not
appear, and the bars “– –:– –:– –”
appear.
Types of trouble and their solutions
You cannot charge the battery pack
installed to your camcorder.
The melody or beep sounds for 5
seconds.
No function works though the power
is on.
While charging the battery pack, no
indicator appears or the indicator
flashes in the display window.