Filter
Top Products
AIR-SA20PK.GB.4-117-793-32(1)
27
GB
Operations
5
Press ENTER on the unit.
6
Repeat steps 1 through 5 to
store other stations.
You can preset up to 20 FM and 10
AM stations. e preset stations are
retained for about half a day even if
you disconnect the power supply cord
or if a power failure occurs.
To call up a preset radio station using
the main unit
Press PRESET +/ repeatedly.
To call up a preset radio station using
the sub units
1
Preset radio stations on the main unit
(see “Presetting radio stations” (page
26)).
2
Select the tuner channel.
Press S-AIR CH repeatedly until
“TUNER” appears in the display.
3
Select “FM” or “AM.”
Press and hold S-AIR CH until “FM”
changes to “AM” or vice versa.
4
Press PRESET +/ repeatedly to
select a preset station.
To check the frequency of the station
name
Press DISPLAY on the remote for the
main unit or DISPLAY on the sub unit
while the station name is displayed.
To return the station name indication,
press DISPLAY while the frequency is
displayed.
e display on both the main unit and
sub unit is switched if DISPLAY is
pressed on either the main unit or sub
unit.
Using an optional AV
system
You can enjoy audio and video of the
connected iPod with an optional AV
system.
1
Connect an optional AV system
(such as a TV, etc.) to the iPod
AUDIO OUT L/R jacks and/or
the iPod VIDEO OUT jack of the
main unit using an optional
audio cord and/or video cable.
2
Place an iPod on the iPod
connector on the main unit.
3
Start playback of the iPod.
See “Listening to iPod music using
the S-AIR connection” (page 23).
Note
e tuner’s sound cannot be output through
the iPod AUDIO OUT L/R jacks.
Before enjoying video, adjust the video
settings on the iPod to the appropriate
settings according to your situation.
Tip
Even if you change the S-AIR mode or the
S-AIR channel using PARTY CH, audio and/or
video from the connected iPod will continue
to be output from the iPod AUDIO L/R jacks
and/or the iPod VIDEO OUT jack.