Filter
Top Products
[ Operation ]
29
will be displayed and the recording will not occur.
Editing a Scheduled Recording
Once you’ve set up a scheduled recording, you can review and edit the recording settings by
choosing Already Scheduled from the Recording menu. (Figure 19) Selecting this option will
display a list of all recordings already scheduled. (Figure 22) Selecting a scheduled recording
from the list will take you to the Edit Recording screen and allow you to make changes to the
parameters for that recording. (Figure 23)
Edit Recording 7:30AM
Channel:
Date:
Start Time:
Duration:
Repeating:
Keep Last:
12
Mon 04/24
7:55 AM
54 min
Mon - Fri
All Shows
Done
Press SELECT to change
Already Scheduled
Weekdays
Every Mon
7:30am
1:00pm
12
35
Synchronizing the Stiletto 2 to your PC computer
To synchronize the Stiletto 2 to your PC computer, be sure the USB cable is connected be-
tween the home dock and your PC computer, and that you have installed the My Sirius Studio
software.
Place the Stiletto 2 in the home dock and press the PC Sync button on the front of the dock
to initiate the USB connection. If you attempt to use the Stiletto 2 while the USB connection
is active, you will be prompted to confirm that you wish to disconnect from the PC computer,
and terminate the USB connection.
Refer to the software manual included on the My Sirius Studio CD-ROM for more information
about using the software, or the manual may be downloaded from the SIRIUS website at
http://www.sirius.com.
Note: Scheduled recordings on multiple channels cannot happen at the same time. If an
attempt is made to create a scheduled recording which will conflict with an existing one, the
Recording Conflict error message will be displayed and give you the option to either cancel
the older conflicting recording or go back and change the settings of the new recording.
Note: Scheduled recordings on multiple channels cannot happen at the same time. If an
attempt is made to create a scheduled recording which will conflict with an existing one, the
Recording Conflict error message will be displayed and give you the option to either cancel
the older conflicting recording or go back and change the settings of the new recording.
Figure 22Figure 22
Figure 23Figure 23