Filter
Top Products
[ Installation ]
20
To access the antenna aiming or signal indicator screen, press the Home button and select
Settings Device Antenna Aiming. The SATELLITE portion of the display screen (Figure
10) shows the strength of the signal being received from the satellite, while the TERRES-
TRIAL portion of the display screen shows the strength of the signal being received from
terrestrial based transmitters, if available.
Antenna Aiming
Press BACK when done
SATELLITE
Adjust your antenna
position to maximize signal
strength.
TERRESTRIAL
Aiming the antenna consists of two adjustments. The first adjustment is to tilt the clamshell at a
45 degree angle. While observing the signal strength, make small adjustments to the angle of
tilt of the clamshell until the highest possible signal strength is achieved. (Figure 11)
THIS SURFACE OF THE
ANTENNA SHOULD BE
POINTED AT THE SKY
TOWARDS THE DIRECTION
OF THE SATELLITES
Figure 10Figure 10
Figure 11Figure 11