Filter
Top Products
- 17 -
PASSWORD
Here you can change the preset password
(888888) and enter your own password. Only the
numbers 0-9 can be used.
• To change the password select the entry
CHANGE.
• Enter in the line OLD PASSWORD the valid
password with the number buttons. The tab chan-
ges to the next line NEW PASSWORD.
• Enter the new password with the number buttons.
The tab changes to the next line CONFIRM PW.
• Enter the new password with the number buttons.
The tab changes to the OK field.
• Press the button
OK/ENTER. The password has now
been changed.
Note:
In the event that you forget your password you can
use the factory default password (888888).
X X X XOLD PASSWORD
NEW PASSWORD
CONFIRM PW
OK
* * PASSWORD SETUP PAGE * ** * PASSWORD SETUP PAGE * ** * PASSWORD SETUP PAGE * *
CHANGE PASSWORDCHANGE PASSWORDCHANGE PASSWORD
CHANGECHANGECHANGE
PASSWORD MODEPASSWORD MODEPASSWORD MODE
PASSWORDPASSWORDPASSWORD
ONONON
8.6 EXIT SETUP
• Select the last menu in the toolbar and press the
button
OK/ENTER to exit the setup menu.
9. Sound functions
9.1 To control the Volume
Press the button VOL+ o to increase the volume.
Press the button
VOL- a to decrease the volume.
9.2 Mute
Press the MUTE button to switch off the sound.
To switch the sound on again press the
MUTE button
once more or press one of the buttons
VOL+ or VOL-.
10. Playback of DVD, SVCD,
VCD and CD discs
10.1 Inserting the disc
• Open the disc tray of the DVD player by
pressing the
OPEN/CLOSE button.
"OPEN" will now appear in the display.
• Place a DVD/VCD/S-VCD with the inscribed/
labelled side facing up in the disc tray.
• Close the flap of the disc tray.
"LOAD" will appear in the display.
• The contents of the inserted DVD/VCD/S-VCD
will now be loaded; this may take a few se-
conds.
• Playback of the inserted DVD/VCD/S-VCD starts
automatically.
EXIT SETUPEXIT SETUPEXIT SETUP
IB_KH6500_AR23388_LB6 01.08.2008 11:47 Uhr Seite 17