Sharp XL-HF151PH(S) MP3 Docking Station User Manual


 
11/5/12 10_HF151PH_EN.fm
E-8
10
9
8
7
6
5
4
3
2
1
Listening to the iPod, iPhone or iPad
(continued)
Caution:
Unplug all accessories from the iPod or iPhone before
inserting it into the dock.
Sound will only switch from iPhone to the main unit after
authentication process is completed in approximately 10
seconds.
Incoming calls will pause the playback.
Once the calls are answered, the conversation can only be
heard through the built-in iPhone speaker. Turn on the
iPhone speaker or undock the iPhone to start conversation.
Simply remove the iPod or iPhone from the docking station or
iPad from USB terminal.
It is safe to do so even during
playback.
Notes:
If the TV Out setting is already turned on at video menu, the
video is automatically displayed on the TV screen when
ENTER key is pressed.
TV out display is not support through USB terminal. (iPad)
To return to watching video on iPod or iPhone screen, press
the MENU button to enter video menu. Then press the
DISPLAY (TV OUT) button for more than 2 seconds until
“iPod Display” appears.
During iPod or iPhone video playback, pressing the DISPLAY
(TV OUT) button will not toggle video out display between
iPod and TV.
Caution:
Unplug all accessories for the iPod or iPhone before inserting
it into the docking station.
Stop button ( ) at main unit is invalid during iPod function.
Adaptor
No.
iPhone
Description
Capacity
12 iPhone 4GB & 8GB & 16GB
15 iPhone 3G 8GB & 16GB
15 iPhone 3GS 16GB & 32GB
19 iPhone 4 16GB & 32GB
To insert adaptor for iPod or iPhone
1
Open the docking station for iPod and iPhone by pulling
up.
2 Insert the adaptor for iPod and iPhone into unit and
connect your iPod or iPhone.
To remove adaptor for iPod or iPhone
Insert the tip of a screwdriver (“–” type,
small) into the adaptor hole as shown
and lift upward to remove.
iPod or iPhone playback
1
Press the ON/STAND-BY button to turn the power on.
2
Press the iPod button on the remote control or FUNCTION
button repeatedly on the main unit to select iPod function.
3
Insert iPod or iPhone unit in iPod dock of main unit. “Dock
Ok” will appear.
4
Press the / (iPod / ) button to start playback.
iPhone
Dock connector
iPhone (bottom)
Dock for iPhone
Connector for iPhone
Adaptor for iPhone
iPhone playback
To disconnect iPod, iPhone or iPad
Watching videos on a TV connected to
iPod or iPhone
1
Press the DISPLAY (TV OUT) button for more than 2
seconds. “TV Display” will appear on display.
2
Press the ENTER button to start playback.
CD/USB
RDS