Filter
Top Products
00/12/26 90SEC_40_47.fm
43
References
-Error Messages-
NO SIGNAL
z
Poor connection of the digital cable.
z
Connect the digital cable securely.
z
No output signal comes out from the
connected unit to playback.
z
If the portable CD player has a function to prevent sound
skips, deactivate it.
z
The input signal has improper sampling
frequency.
z
Play back with the connected unit.
NOT PLAY
z
You tried to play back a track that can-
not be played with this equipment.
z
Play back another track.
PLAY MD
z
You recorded on a playback-only disc.
z
Replace it with a recordable disc.
POWER ?
z
Improper power is being supplied.
z
Use one of the specified power sources.
PROTECTED
z
The write protection tab of a MiniDisc is
set to the protected position.
z
Move the write protection tab back to its original posi-
tion.
z
You tried to record on a playback-only disc.
z
Replace it with a recordable MiniDisc.
SORRY
z
Since a track number is currently being
located or updated, the unit cannot ac-
cept your command.
z
Wait for a while and try the operation again.
TEMP OVER
z
The temperature is too high.
z
Turn off the power, and wait for a while.
TOC FORM (**)
z
There is an error in the recording signal.
z
Erase all of the tracks, and then record again.
TOC FULL
z
There is no space left for recording
character information (track names,
disc names, etc.).
z
Replace it with another recordable disc.
Tr. Protect
z
The track has been protected from be-
ing erased.
z
Edit the track with the device on which it was recorded.
? DISC
z
A disc which contains data other than
music was played.
z
A disc which contains non-music data cannot be played.
z
There is an error in the signal recorded
on the disc.
z
Replace it with another recorded disc.
Number or symbol appears in (*) position.