Filter
Top Products
00/12/26 90SEC_40_47.fm
42
References
-Error Messages-
Error Messages
ERROR MESSAGES
MEANING REMEDY
BATT EMPTY
z
The battery is run down.
z
Charge the rechargeable battery or replace the al-
kaline battery (or use the AC adaptor for power).
BLANK MD
z
Nothing is recorded.
z
Replace the disc with a recorded disc.
Can't COPY
z
You tried to record from a copy prohibited
MiniDisc.
z
Record using the analog cable.
Can't EDIT
z
A track cannot be edited.
z
Change the stop position of the track and then edit it.
Can't READ (*)
z
The disc data cannot be read because the
disc or unit is damaged.
z
Reload the disc.
z
Replace it with another recorded disc.
Can't REC
z
Recording cannot be performed correctly
due to vibration or shock.
z
Re-record or replace it with another recordable
disc.
Can't STAMP
z
Stamp function does not work.
z
Check the number of tracks.
Can't WRITE
z
Cannot save the TOC information correctly
to a MiniDisc. (A large portion of the disc has
been damaged.)
z
Replace the disc with another recordable disc.
DEFECT
z
The disc is scratched.
z
If the sound you hear is not right, record again.
z
Replace the disc with another recordable disc.
DISC FULL
z
The disc is out of recording space.
z
Replace it with another recordable disc.
Er-MD (**)
z
The microprocessor has reported a system
fault and the unit is out of order.
z
To have it repaired, go to the distributor where you
purchased the unit.
HOLD
z
The unit is in the hold mode.
z
Cancel the hold mode.
LOCKED
z
You removed a MiniDisc while recording or
editing.
z
Turn off the power and remove the MiniDisc.
NO DISC
z
A disc has not been loaded.
z
Load a disc.
Number or symbol appears in (*) position.