Sharp MD-MT877 MP3 Player User Manual


 
58
References
Specifications
Specifications
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification
changes for product improvement without prior notice.
The performance specification figures indicated are nominal values of production units. There may be some devia-
tions from these values in individual units.
Power source DC 1.2V: Rechargeable Nickel-Metal Hydride battery (AD-N55BT) x 1
DC 5V: AC adaptor (AC 120V, 60 Hz)
DC 1.5V: Commercially available, AA size (LR6), alkaline battery x 1
DC 1.5V: Separately available car adaptor, AD-CA55X (for cars with a 12-24V DC nega-
tive ground electrical system) (Used with separately available plug adaptor
(AD-M66PA))
Power consumption 7 W (AC adaptor)
Output power RMS; 10 mW (5 mW + 5 mW) (0.2% T.H.D.)
Charging time Approx. 3.5 hours
Input sensitivity MIC H: reference input level 0.25 mV input impedance 10 k ohms
MIC L: reference input level 2.5 mV input impedance 10 k ohms
LINE: reference input level 100 mV input impedance 20 k ohms
Output level Earphones
:
maximum output level 5 mW + 5 mW load impedance 32 ohms
LINE: specified output 250 mV (-12 dB) load impedance 10 k ohms
Dimensions Width: 2-27/32 (71.9 mm) Height: 11/16 (16.8 mm) Depth: 3-1/8 (78.7 mm)
Weight 0.29 lbs. (131 g) with rechargeable battery
Input jack Line/optical digital, microphone (powered by the main unit)
Output jack Earphones (impedance: 32 ohms)/remote control unit
Type Portable MiniDisc recorder
Signal readout Non-contact, 3-beam semiconductor laser pickup
Audio channels Stereo 2 channels/monaural (long-play mode) 1 channel
Frequency response
20 20,000 Hz (± 3 dB)